From ilektrojohn at yahoo.gr Thu Aug 2 02:23:40 2007 From: ilektrojohn at yahoo.gr (john kakavas) Date: Thu, 2 Aug 2007 10:23:40 +0100 (BST) Subject: [NoCat] NoCatAuth for authentication purposes only Message-ID: <31625.34535.qm@web25810.mail.ukl.yahoo.com> Good morning What we need to be done is use the captive portal Nocat implements for authentication purposes only. We want NoCat to provide the captive portal's splash screen, authenticate our users againist our radius server and if successful redirect all trafic to our router. client ------ AP-----NoCat------router / client___/ So noCat needs to be between the access points and the router, check users credentials and if they're ok forward all traffic to the router, as if it was not there . We use 2 aironet cisco 1200 AP each one serving a different vlan. Do you think what we need be done is possible using noCatAuth? --------------------------------- ?????????????? Yahoo! ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr From steve.platt at mrc-bsu.cam.ac.uk Thu Aug 2 07:07:51 2007 From: steve.platt at mrc-bsu.cam.ac.uk (Steve Platt) Date: Thu, 02 Aug 2007 15:07:51 +0100 Subject: [NoCat] NoCatAuth for authentication purposes only In-Reply-To: Message from john kakavas of "Thu, 02 Aug 2007 10:23:40 BST." <31625.34535.qm@web25810.mail.ukl.yahoo.com> Message-ID: ilektrojohn at yahoo.gr said: > We want NoCat to provide the captive portal's splash screen, authenticate our > users againist our radius server and if successful redirect all trafic to our > router. If I have understood your question, or even part of it, I think that we are using NoCat for the same sort of thing ... between APs and a router. So NoCat does NOT route but instead acts as a bridge (only). I think the key steps I took (as a nocat newbie) were :- 1) set up a bridge device (eg br0) containing your two ethernet interfaces and assign any IP address to br0 instead of eth0 or eth1 2) configure nocat to use br0 as the "external device" *and* as the "internal device" (don't mention eth0/1) 3) enable "RouteOnly 1" - confusingly (to me) this *stops* nocat from acting in a routing mode! This seemed to work for us but I might be wrong! Steve Platt From ilektrojohn at yahoo.gr Fri Aug 3 02:11:49 2007 From: ilektrojohn at yahoo.gr (john kakavas) Date: Fri, 3 Aug 2007 10:11:49 +0100 (BST) Subject: [NoCat] =?iso-8859-7?b?yN3s4TogUmU6ICBOb0NhdEF1dGggZm9yIGF1dGhl?= =?iso-8859-7?q?ntication_purposes_only?= In-Reply-To: Message-ID: <928201.89384.qm@web25808.mail.ukl.yahoo.com> Ok thanks steve, thats exactly what is need to be done. I' ll give it a try and see what happens. Steve Platt ??????: ilektrojohn at yahoo.gr said: > We want NoCat to provide the captive portal's splash screen, authenticate our > users againist our radius server and if successful redirect all trafic to our > router. If I have understood your question, or even part of it, I think that we are using NoCat for the same sort of thing ... between APs and a router. So NoCat does NOT route but instead acts as a bridge (only). I think the key steps I took (as a nocat newbie) were :- 1) set up a bridge device (eg br0) containing your two ethernet interfaces and assign any IP address to br0 instead of eth0 or eth1 2) configure nocat to use br0 as the "external device" *and* as the "internal device" (don't mention eth0/1) 3) enable "RouteOnly 1" - confusingly (to me) this *stops* nocat from acting in a routing mode! This seemed to work for us but I might be wrong! Steve Platt --------------------------------- ?????????????? Yahoo! ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr From ilektrojohn at yahoo.gr Sat Aug 4 10:54:44 2007 From: ilektrojohn at yahoo.gr (john kakavas) Date: Sat, 4 Aug 2007 18:54:44 +0100 (BST) Subject: [NoCat] =?iso-8859-7?b?yN3s4TogIMjd7OE6IFJlOiAgTm9DYXRBdXRoIGZv?= =?iso-8859-7?q?r_authentication_purposes_only?= In-Reply-To: <928201.89384.qm@web25808.mail.ukl.yahoo.com> Message-ID: <847930.91869.qm@web25815.mail.ukl.yahoo.com> Steve, how to do you ensure that traffic passes through the server that nocat is set up without that server acting as a router at the same time?If a just assign it an ip address from our network, how it will be able to capture all traffic coming from the wireless clients?Do i have to do arp spoofing so all packets are sent to noCat? john kakavas ??????: Ok thanks steve, thats exactly what is need to be done. I' ll give it a try and see what happens. Steve Platt ??????: ilektrojohn at yahoo.gr said: > We want NoCat to provide the captive portal's splash screen, authenticate our > users againist our radius server and if successful redirect all trafic to our > router. If I have understood your question, or even part of it, I think that we are using NoCat for the same sort of thing ... between APs and a router. So NoCat does NOT route but instead acts as a bridge (only). I think the key steps I took (as a nocat newbie) were :- 1) set up a bridge device (eg br0) containing your two ethernet interfaces and assign any IP address to br0 instead of eth0 or eth1 2) configure nocat to use br0 as the "external device" *and* as the "internal device" (don't mention eth0/1) 3) enable "RouteOnly 1" - confusingly (to me) this *stops* nocat from acting in a routing mode! This seemed to work for us but I might be wrong! Steve Platt --------------------------------- ?????????????? Yahoo! ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr _______________________________________________ NoCat mailing list NoCat at lists.nocat.net http://lists.nocat.net/mailman/listinfo/nocat --------------------------------- ?????????????? Yahoo! ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr From Scott.Lemon at HumanXtensions.com Sat Aug 4 23:02:23 2007 From: Scott.Lemon at HumanXtensions.com (Scott C. Lemon) Date: Sun, 5 Aug 2007 00:02:23 -0600 Subject: [NoCat] nocat + admin site In-Reply-To: References: Message-ID: <000b01c7d726$326b2440$a5d3500a@MobileDuoCell> I'm curious ... How did your development venture work? It's past the 4/July ... :-) Also ... I have modified the code of NoCat to handle account expirations, and then wrote some code for accepting purchases of time via PayPal to update account expiration times in an LDAP directory. I've thought about integrating all of this into the NoCat codebase, however I have wondered about the overall interest in NoCat and if there was a community that would use the updates ... Too many projects ... Not enough time ... :-) P.S. Who would want phpNoCat? An entire rewrite of NoCat in PHP? :-) Scott C. Lemon -----Original Message----- From: nocat-bounces at lists.nocat.net [mailto:nocat-bounces at lists.nocat.net] On Behalf Of twistedpickles Sent: Wednesday, June 27, 2007 3:10 PM To: nocat at lists.nocat.net Subject: Re: [NoCat] nocat + admin site > > > > > On 6/26/07, Scott E. Barasch wrote: > > All, > > > > I'd be interested in the code, as well. > > > > I had been running nocat for a while, until it crashed, at which > > time I switched to WifiDog. > > > > I like the ability of WifiDog to act as a collaboration portal / > > hotspot for logged in users. > > > > Would it be possible to put in a request for NoCat to have the > > following modules to addon to the standard install: > > > > * A module to Joomla CMS, so that users could be redirected to a > > Joomla site, where they'd sign into Joomla and NoCat via the same > > SSO, and then get to use all of the features of a Joomla portal... > > > > * Another module, which would work in tandem with the one above to > > serve up the NoCat network as a paid hotspot for public access (with > > the option of free access to private and admin users), where users > > could be charged via paypal or credit card or some other already in > > place online payment service for web access at a by minute / hour / day time frame. > > > > * Could we somehow tie in your web administration module into the > > Joomla Framework for NoCat, for administering a Joomla / NoCat community portal? > > > > * Could we tie NoCat into LDAP, Active Directory, and possilbty > > RADIUS? (In that order?) > > > > I am just learning PHP, and I don't know PERL, so I'm afraid I won't > > be able to be a big help; however I have a friend who's big into > > programming, who may be able to help. > > > > I'm on summer break from college for right now, and will have a > > couple of hours during each weekend top possibly do some simple PHP, > > or C++, or I could ask my friend to help with pother PHP or PERL stuff... > > > > I'd just like some help in putting together a group effort to step > > up the functionality of NoCat, and make it something people would > > turn to as their first choice for an open source Captive Portal / Hotspot solution. > > > > Please let me know if this is a possible project that could be started. > > > > Thanks, > > > > Scott. > > I don't have any intentions to tie the admin site into a payment gateway at the moment. Nocat can currently connect to LDAP. I'll be experimenting with LDAP this summer too. I don't know what joomla is and I have never used wifidog :( The project will be open source so the features you are interested in others may also have interests in and can be implemented. I will probably put the code up near 4/July. -- ::twistedPickles:: : _______________________________________________ NoCat mailing list NoCat at lists.nocat.net http://lists.nocat.net/mailman/listinfo/nocat From carlosh at linuxservices.co.nz Sat Aug 4 23:20:39 2007 From: carlosh at linuxservices.co.nz (Carlos Hernandez) Date: Sun, 05 Aug 2007 18:20:39 +1200 Subject: [NoCat] nocat + admin site In-Reply-To: <000b01c7d726$326b2440$a5d3500a@MobileDuoCell> References: <000b01c7d726$326b2440$a5d3500a@MobileDuoCell> Message-ID: <46B56C37.2000108@linuxservices.co.nz> phpNoCat ? I woul be interested in using that, thanks. As for those modifications that you talk about here.. where can I get your version to give it a try? Thanks, Carlos -- Scott C. Lemon wrote: > I'm curious ... How did your development venture work? It's past the 4/July > ... :-) > > Also ... I have modified the code of NoCat to handle account expirations, > and then wrote some code for accepting purchases of time via PayPal to > update account expiration times in an LDAP directory. I've thought about > integrating all of this into the NoCat codebase, however I have wondered > about the overall interest in NoCat and if there was a community that would > use the updates ... > > Too many projects ... Not enough time ... :-) > > P.S. Who would want phpNoCat? An entire rewrite of NoCat in PHP? :-) > > > Scott C. Lemon > > > > -----Original Message----- > From: nocat-bounces at lists.nocat.net [mailto:nocat-bounces at lists.nocat.net] > On Behalf Of twistedpickles > Sent: Wednesday, June 27, 2007 3:10 PM > To: nocat at lists.nocat.net > Subject: Re: [NoCat] nocat + admin site > > >> >> >> On 6/26/07, Scott E. Barasch wrote: >> >>> All, >>> >>> I'd be interested in the code, as well. >>> >>> I had been running nocat for a while, until it crashed, at which >>> time I switched to WifiDog. >>> >>> I like the ability of WifiDog to act as a collaboration portal / >>> hotspot for logged in users. >>> >>> Would it be possible to put in a request for NoCat to have the >>> following modules to addon to the standard install: >>> >>> * A module to Joomla CMS, so that users could be redirected to a >>> Joomla site, where they'd sign into Joomla and NoCat via the same >>> SSO, and then get to use all of the features of a Joomla portal... >>> >>> * Another module, which would work in tandem with the one above to >>> serve up the NoCat network as a paid hotspot for public access (with >>> the option of free access to private and admin users), where users >>> could be charged via paypal or credit card or some other already in >>> place online payment service for web access at a by minute / hour / day >>> > time frame. > >>> * Could we somehow tie in your web administration module into the >>> Joomla Framework for NoCat, for administering a Joomla / NoCat community >>> > portal? > >>> * Could we tie NoCat into LDAP, Active Directory, and possilbty >>> RADIUS? (In that order?) >>> >>> I am just learning PHP, and I don't know PERL, so I'm afraid I won't >>> be able to be a big help; however I have a friend who's big into >>> programming, who may be able to help. >>> >>> I'm on summer break from college for right now, and will have a >>> couple of hours during each weekend top possibly do some simple PHP, >>> or C++, or I could ask my friend to help with pother PHP or PERL >>> > stuff... > >>> I'd just like some help in putting together a group effort to step >>> up the functionality of NoCat, and make it something people would >>> turn to as their first choice for an open source Captive Portal / >>> > Hotspot solution. > >>> Please let me know if this is a possible project that could be started. >>> >>> Thanks, >>> >>> Scott. >>> >>> > > > I don't have any intentions to tie the admin site into a payment gateway at > the moment. Nocat can currently connect to LDAP. I'll be experimenting with > LDAP this summer too. > > I don't know what joomla is and I have never used wifidog :( > > The project will be open source so the features you are interested in others > may also have interests in and can be implemented. > > I will probably put the code up near 4/July. > > -- > ::twistedPickles:: : > > From twistedpickles at gmail.com Sun Aug 5 21:17:06 2007 From: twistedpickles at gmail.com (twistedpickles) Date: Sun, 5 Aug 2007 23:17:06 -0500 Subject: [NoCat] nocat + admin site In-Reply-To: <46B56C37.2000108@linuxservices.co.nz> References: <000b01c7d726$326b2440$a5d3500a@MobileDuoCell> <46B56C37.2000108@linuxservices.co.nz> Message-ID: Scott all is well, currently testing against fresh installs of NoCatAuth. I will release the admin site by the weeks end. I have been thinking of a php re-write of Nocat as well. I would definitely participate. -- ::twistedPickles:: : From twistedpickles at gmail.com Sun Aug 5 21:38:58 2007 From: twistedpickles at gmail.com (twistedpickles) Date: Sun, 5 Aug 2007 23:38:58 -0500 Subject: [NoCat] =?iso-8859-7?b?yN3s4TogyN3s4TogUmU6IE5vQ2F0QXV0aCBmb3Ig?= =?iso-8859-7?q?authentication_purposes_only?= In-Reply-To: <847930.91869.qm@web25815.mail.ukl.yahoo.com> References: <928201.89384.qm@web25808.mail.ukl.yahoo.com> <847930.91869.qm@web25815.mail.ukl.yahoo.com> Message-ID: On 8/4/07, john kakavas wrote: > Steve, how to do you ensure that traffic passes through the server that nocat is set up without that server acting as a router at the same time?If a just assign it an ip address from our network, how it will be able to capture all traffic coming from the wireless clients?Do i have to do arp spoofing so all packets are sent to noCat? > > john kakavas ??????: Ok thanks steve, thats exactly what is need to be done. I' ll give it a try and see what happens. > > Steve Platt ??????: > > ilektrojohn at yahoo.gr said: > > We want NoCat to provide the captive portal's splash screen, authenticate our > > users againist our radius server and if successful redirect all trafic to our > > router. > > If I have understood your question, or even part of it, I think that we are > using NoCat for the same sort of thing ... between APs and a router. > > So NoCat does NOT route but instead acts as a bridge (only). > > I think the key steps I took (as a nocat newbie) were :- > > 1) set up a bridge device (eg br0) containing your two ethernet interfaces > and assign any IP address to br0 instead of eth0 or eth1 > > 2) configure nocat to use br0 as the "external device" *and* as the "internal > device" (don't mention eth0/1) > > 3) enable "RouteOnly 1" - confusingly (to me) this *stops* nocat from acting > in a routing mode! > > This seemed to work for us but I might be wrong! > Steve Platt > > > > > --------------------------------- > ?????????????? Yahoo! > ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? > http://login.yahoo.com/config/mail?.intl=gr > _______________________________________________ > NoCat mailing list > NoCat at lists.nocat.net > http://lists.nocat.net/mailman/listinfo/nocat > > > > --------------------------------- > ?????????????? Yahoo! > ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? > http://login.yahoo.com/config/mail?.intl=gr > _______________________________________________ > NoCat mailing list > NoCat at lists.nocat.net > http://lists.nocat.net/mailman/listinfo/nocat > I'm following this topic closely as I am interested in a similar setup. -- ::twistedPickles:: : From ilektrojohn at yahoo.gr Tue Aug 7 14:53:48 2007 From: ilektrojohn at yahoo.gr (john kakavas) Date: Tue, 7 Aug 2007 22:53:48 +0100 (BST) Subject: [NoCat] =?iso-8859-7?b?yN3s4TogUmU6ICDI3ezhOiDI3ezhOiBSZTogTm9D?= =?iso-8859-7?q?atAuth_for_authentication_purposes_only?= In-Reply-To: Message-ID: <356718.90285.qm@web25810.mail.ukl.yahoo.com> Things have benn going wel with noCat . Th bridg forwrds all packets in layer 2, and nocat captures all packets going through. I managed to setup an open portal with a splash screen, and tommorow i m going to try authentication with our radius server. I saw people disencourage the NoCatAuthServer being on the same machine as the gateway.why is that? P.s I didn't have to enable RouteOnly ;) twistedpickles ??????: On 8/4/07, john kakavas wrote: > Steve, how to do you ensure that traffic passes through the server that nocat is set up without that server acting as a router at the same time?If a just assign it an ip address from our network, how it will be able to capture all traffic coming from the wireless clients?Do i have to do arp spoofing so all packets are sent to noCat? > > john kakavas ??????: Ok thanks steve, thats exactly what is need to be done. I' ll give it a try and see what happens. > > Steve Platt ??????: > > ilektrojohn at yahoo.gr said: > > We want NoCat to provide the captive portal's splash screen, authenticate our > > users againist our radius server and if successful redirect all trafic to our > > router. > > If I have understood your question, or even part of it, I think that we are > using NoCat for the same sort of thing ... between APs and a router. > > So NoCat does NOT route but instead acts as a bridge (only). > > I think the key steps I took (as a nocat newbie) were :- > > 1) set up a bridge device (eg br0) containing your two ethernet interfaces > and assign any IP address to br0 instead of eth0 or eth1 > > 2) configure nocat to use br0 as the "external device" *and* as the "internal > device" (don't mention eth0/1) > > 3) enable "RouteOnly 1" - confusingly (to me) this *stops* nocat from acting > in a routing mode! > > This seemed to work for us but I might be wrong! > Steve Platt > > > > > --------------------------------- > ?????????????? Yahoo! > ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? > http://login.yahoo.com/config/mail?.intl=gr > _______________________________________________ > NoCat mailing list > NoCat at lists.nocat.net > http://lists.nocat.net/mailman/listinfo/nocat > > > > --------------------------------- > ?????????????? Yahoo! > ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? > http://login.yahoo.com/config/mail?.intl=gr > _______________________________________________ > NoCat mailing list > NoCat at lists.nocat.net > http://lists.nocat.net/mailman/listinfo/nocat > I'm following this topic closely as I am interested in a similar setup. -- ::twistedPickles:: : --------------------------------- ?????????????? Yahoo! ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr From steve.platt at mrc-bsu.cam.ac.uk Wed Aug 15 07:10:01 2007 From: steve.platt at mrc-bsu.cam.ac.uk (Steve Platt) Date: Wed, 15 Aug 2007 15:10:01 +0100 Subject: [NoCat] problems renewing logins Message-ID: Has anyone had problems with sustaining a nocat login? We're using firefox (mostly) and we have popups enabled/allowed from our nocat gateway. After our browser is "captured" we login successfully in the pop-up window but find that *sometimes* our client computer seems to get "cut off" by the gateway and our browser window gets recaptured; leaving both the original pop-up window that still says we are logged in *plus* the nocat login window appears in another broswer window, perhaps the one we were last using. It is as if the pop-up window is not doing its job properly. The odd thing is that some users do not have this problem, yet others often do. Any ideas please? Steve Platt From steve.platt at mrc-bsu.cam.ac.uk Wed Aug 15 09:12:52 2007 From: steve.platt at mrc-bsu.cam.ac.uk (Steve Platt) Date: Wed, 15 Aug 2007 17:12:52 +0100 Subject: [NoCat] =?iso-8859-7?b?yN3s4TogUmU6ICDI3ezhOiDI3ezhOiBSZTogTm9D?= =?iso-8859-7?q?atAuth_for_authentication_purposes_only?= In-Reply-To: Message from john kakavas of "Tue, 07 Aug 2007 22:53:48 BST." <356718.90285.qm@web25810.mail.ukl.yahoo.com> Message-ID: > ... > disencourage the NoCatAuthServer being on the same machine as the gateway > why is that? I think this is a question of security. I think that the gateway machine is very exposed/vulnerable but that the authentication server can be put behind a firewall and is thus much less vulnerable to attack so it's a safer place to access authentication information. The two parts communicate through the firewall using encrypted (HTTPS) traffic and PGP-signed messages ... Another reason to have the two parts on separate systems is that it's less confusing for you as the adminstrator :-) Steve From twistedpickles at gmail.com Wed Aug 15 18:25:43 2007 From: twistedpickles at gmail.com (twistedpickles) Date: Wed, 15 Aug 2007 20:25:43 -0500 Subject: [NoCat] problems renewing logins Message-ID: <46c3a728.20094e0a.2eec.126b@mx.google.com> I experienced that problem about 2 years ago. I can't remember what I did to correct it. Just for kix make sure that the pop-up windows is chmod 755 and that it is owned by apache. ::twistedpickles :: : Message sent from Mobile Handset -----Original Message----- From: "Steve Platt" To: NoCat at lists.nocat.net Sent: 08/15/07 9:10 AM Subject: [NoCat] problems renewing logins Has anyone had problems with sustaining a nocat login? We're using firefox (mostly) and we have popups enabled/allowed from our nocat gateway. After our browser is "captured" we login successfully in the pop-up window but find that *sometimes* our client computer seems to get "cut off" by the gateway and our browser window gets recaptured; leaving both the original pop-up window that still says we are logged in *plus* the nocat login window appears in another broswer window, perhaps the one we were last using. It is as if the pop-up window is not doing its job properly. The odd thing is that some users do not have this problem, yet others often do. Any ideas please? Steve Platt _______________________________________________ NoCat mailing list NoCat at lists.nocat.net http://lists.nocat.net/mailman/listinfo/nocat From noteris at gmail.com Thu Aug 16 05:59:35 2007 From: noteris at gmail.com (benoit noteris) Date: Thu, 16 Aug 2007 14:59:35 +0200 Subject: [NoCat] [PGP key in apache-ssl log (debian etch)] Message-ID: <4551fd5b0708160559y57444dc1o321bf027ffde1655@mail.gmail.com> Hi I'm running a gateway and authserv on the same server, my pbs is int authentification process after fill login pass and click on login y get a internal server error (error 500) and in the apache-ssl log i had that : [2007-08-16 16:32:35] gpg --sign --armor --homedir=/usr/local/nocat/authserv/cgi-bin/../pgp --keyring trustedkeys.gpg--no-tty -o- returned error: ( 2 ) Can't call method "text" on an undefined value at ../lib//NoCat/AuthService.pm line 134. [Thu Aug 16 16:32:35 2007] [error] [client 10.10.10.2] Premature end of script headers: /usr/local/nocat/authserv/cgi-bin/login [Thu Aug 16 16:32:35 2007] [error] Accounting: couldn't setup the database link! so I've read that can be du to passphrase so i re-do the key and let it blank but i still have the same issue if anybody could put me on the right way I'll apreciate so much From twistedpickles at gmail.com Fri Aug 17 13:13:42 2007 From: twistedpickles at gmail.com (twistedpickles) Date: Fri, 17 Aug 2007 15:13:42 -0500 Subject: [NoCat] [PGP key in apache-ssl log (debian etch)] In-Reply-To: <4551fd5b0708160559y57444dc1o321bf027ffde1655@mail.gmail.com> References: <4551fd5b0708160559y57444dc1o321bf027ffde1655@mail.gmail.com> Message-ID: Copy over the entire pgp folder in your authserv to the gateway. On 8/16/07, benoit noteris wrote: > > Hi > > I'm running a gateway and authserv on the same server, my pbs is int > authentification process after fill login pass and click on login y get a > internal server error (error 500) and in the apache-ssl log i had that : > > [2007-08-16 16:32:35] gpg --sign --armor > --homedir=/usr/local/nocat/authserv/cgi-bin/../pgp --keyring > trustedkeys.gpg--no-tty -o- returned error: ( 2 ) > Can't call method "text" on an undefined value at > ../lib//NoCat/AuthService.pm line 134. > > [Thu Aug 16 16:32:35 2007] [error] [client 10.10.10.2] Premature end of > script headers: /usr/local/nocat/authserv/cgi-bin/login > > [Thu Aug 16 16:32:35 2007] [error] Accounting: couldn't setup the database > link! > > so I've read that can be du to passphrase so i re-do the key and let it > blank but i still have the same issue > > if anybody could put me on the right way I'll apreciate so much > _______________________________________________ > NoCat mailing list > NoCat at lists.nocat.net > http://lists.nocat.net/mailman/listinfo/nocat > -- ::twistedPickles:: : From twistedpickles at gmail.com Fri Aug 17 13:17:34 2007 From: twistedpickles at gmail.com (twistedpickles) Date: Fri, 17 Aug 2007 15:17:34 -0500 Subject: [NoCat] [PGP key in apache-ssl log (debian etch)] In-Reply-To: <4551fd5b0708160559y57444dc1o321bf027ffde1655@mail.gmail.com> References: <4551fd5b0708160559y57444dc1o321bf027ffde1655@mail.gmail.com> Message-ID: Theres also that error message about your database. I would doulbe check that msqld is running and recheck db name user and pass. -- ::twistedPickles:: : From twistedpickles at gmail.com Fri Aug 17 13:21:41 2007 From: twistedpickles at gmail.com (twistedpickles) Date: Fri, 17 Aug 2007 15:21:41 -0500 Subject: [NoCat] problems renewing logins In-Reply-To: <46c3a728.20094e0a.2eec.126b@mx.google.com> References: <46c3a728.20094e0a.2eec.126b@mx.google.com> Message-ID: Err, what I meant to write was make sure the pop-up html page has permissions of 755. I believe the name of that page is "renew.html". On 8/15/07, twistedpickles wrote: > > I experienced that problem about 2 years ago. I can't remember what I did > to correct it. Just for kix make sure that the pop-up windows is chmod 755 > and that it is owned by apache. > > ::twistedpickles :: : > Message sent from Mobile Handset > > -----Original Message----- > From: "Steve Platt" > To: NoCat at lists.nocat.net > Sent: 08/15/07 9:10 AM > Subject: [NoCat] problems renewing logins > > > Has anyone had problems with sustaining a nocat login? > > We're using firefox (mostly) and we have popups enabled/allowed from our > nocat > gateway. > > After our browser is "captured" we login successfully in the pop-up window > but > find that *sometimes* our client computer seems to get "cut off" by the > gateway and our browser window gets recaptured; leaving both the original > pop-up window that still says we are logged in *plus* the nocat login > window > appears in another broswer window, perhaps the one we were last using. > > It is as if the pop-up window is not doing its job properly. > > The odd thing is that some users do not have this problem, yet others > often do. > > Any ideas please? > > Steve Platt > > > > _______________________________________________ > NoCat mailing list > NoCat at lists.nocat.net > http://lists.nocat.net/mailman/listinfo/nocat > > -- ::twistedPickles:: : From noteris at gmail.com Sun Aug 19 02:12:29 2007 From: noteris at gmail.com (benoit noteris) Date: Sun, 19 Aug 2007 11:12:29 +0200 Subject: [NoCat] [PGP key in apache-ssl log (debian etch)] In-Reply-To: <4551fd5b0708190211x44f0084eja35573bac3a34485@mail.gmail.com> References: <4551fd5b0708160559y57444dc1o321bf027ffde1655@mail.gmail.com> <4551fd5b0708190211x44f0084eja35573bac3a34485@mail.gmail.com> Message-ID: <4551fd5b0708190212n3bd04bfek8ec9a0d8c09ddcaa@mail.gmail.com> 2007/8/19, benoit noteris : > > Thanks I've allready try that , it wasn't worked but i found why in fact > i've try 3 or 4 time and the file had finally few key so i delete every > thing rebuild the key with the make pgpkey and let the pass > phrase blanc after that copy the key files from /authserv/pgp/ to > /gateway/pgp/ folders. > > and that as work well finaly > > thanks for you help anyway > > > 2007/8/17, twistedpickles : > > > > Copy over the entire pgp folder in your authserv to the gateway. > > > > On 8/16/07, benoit noteris wrote: > > > > > Hi > > > > > > I'm running a gateway and authserv on the same server, my pbs is int > > > authentification process after fill login pass and click on login y > > > get a > > > internal server error (error 500) and in the apache-ssl log i had that > > > : > > > > > > [2007-08-16 16:32:35] gpg --sign --armor > > > --homedir=/usr/local/nocat/authserv/cgi-bin/../pgp --keyring > > > trustedkeys.gpg--no-tty -o- returned error: ( 2 ) > > > Can't call method "text" on an undefined value at > > > ../lib//NoCat/AuthService.pm line 134. > > > > > > [Thu Aug 16 16:32:35 2007] [error] [client 10.10.10.2] Premature end > > > of > > > script headers: /usr/local/nocat/authserv/cgi-bin/login > > > > > > [Thu Aug 16 16:32:35 2007] [error] Accounting: couldn't setup the > > > database > > > link! > > > > > > so I've read that can be du to passphrase so i re-do the key and let > > > it > > > blank but i still have the same issue > > > > > > if anybody could put me on the right way I'll apreciate so much > > > _______________________________________________ > > > NoCat mailing list > > > NoCat at lists.nocat.net > > > http://lists.nocat.net/mailman/listinfo/nocat > > > > > > > > > > > -- > > ::twistedPickles:: : > > > From noteris at gmail.com Sun Aug 19 02:12:51 2007 From: noteris at gmail.com (benoit noteris) Date: Sun, 19 Aug 2007 11:12:51 +0200 Subject: [NoCat] [PGP key in apache-ssl log (debian etch)] In-Reply-To: References: <4551fd5b0708160559y57444dc1o321bf027ffde1655@mail.gmail.com> Message-ID: <4551fd5b0708190212u7b8f013elb0c534fb099a40f7@mail.gmail.com> 2007/8/17, twistedpickles : > > Theres also that error message about your database. I would doulbe check > that msqld is running and recheck db name user and pass. > > > > -- > ::twistedPickles:: : From ilektrojohn at yahoo.gr Thu Aug 30 05:19:43 2007 From: ilektrojohn at yahoo.gr (john kakavas) Date: Thu, 30 Aug 2007 12:19:43 +0000 (GMT) Subject: [NoCat] Nocat custom login page Message-ID: <456409.94398.qm@web25807.mail.ukl.yahoo.com> I've edited the login pages of nocat so to meet our company's needs using a little css but i have a problem. When it opens the page, it seems as though the browser can't find the css and cannot detect the encoding of the page (it's utf-8) .If i ask for the page directly from the same pc (https://xxx.xxx.xxx.xxx/login-no-skip.html ) everythings looks fine. The graphics and the encoding of the page. Any suggestions ? ___________________________________________________________ ?????????????? Yahoo!; ?????????? ?? ?????????? ???????? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr From ilektrojohn at yahoo.gr Thu Aug 30 14:17:05 2007 From: ilektrojohn at yahoo.gr (john kakavas) Date: Thu, 30 Aug 2007 21:17:05 +0000 (GMT) Subject: [NoCat] Fw: Nocat custom login page Message-ID: <634017.32348.qm@web25806.mail.ukl.yahoo.com> ----- Forwarded Message ---- From: john kakavas To: twistedpickles Cc: noct at lists.nocat.net Sent: Thursday, August 30, 2007 11:13:27 PM Subject: Re: [NoCat] Nocat custom login page Yes I did. It opens the login-no-skip.html, but it seems as it can't find style.css and the images folder so the pages loads with no graphic. It also cant detect the pages encoding so the text is all symbols. If i access it directly everything is fine. In the error.log i found entries that it was looking for images and css in the usr/local/nocat/auth/cgi-bin isnt that starnge ? why there and not in thd htdocs folder where the html are ? ----- Original Message ---- From: twistedpickles To: john kakavas Sent: Thursday, August 30, 2007 10:42:48 PM Subject: Re: [NoCat] Nocat custom login page did you specify login-no-skip.html as your login page in authserv/nocat.conf -----snip----- # Auth service template names. See the individual templates # for details on what each one does. # LoginForm login.html <--- change to login-no-skip.html LoginOKForm login_ok.html FatalForm fatal.html ExpiredForm expired.html RenewForm renew.html PassiveRenewForm renew_pasv.html --------snip-------- On 8/30/07, john kakavas wrote: I've edited the login pages of nocat so to meet our company's needs using a little css but i have a problem. When it opens the page, it seems as though the browser can't find the css and cannot detect the encoding of the page (it's utf-8) .If i ask for the page directly from the same pc (https://xxx.xxx.xxx.xxx/login-no-skip.html ) everythings looks fine. The graphics and the encoding of the page. Any suggestions ? ___________________________________________________________ ?????????????? Yahoo!; ?????????? ?? ?????????? ???????? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr _______________________________________________ NoCat mailing list NoCat at lists.nocat.net http://lists.nocat.net/mailman/listinfo/nocat -- ::twistedPickles:: : ?????????????? Yahoo! ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr ___________________________________________________________ ?????????????? Yahoo!; ?????????? ?? ?????????? ???????? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr From twistedpickles at gmail.com Thu Aug 30 20:38:13 2007 From: twistedpickles at gmail.com (twistedpickles) Date: Thu, 30 Aug 2007 22:38:13 -0500 Subject: [NoCat] Nocat custom login page In-Reply-To: References: <255529.1208.qm@web25808.mail.ukl.yahoo.com> Message-ID: That is strange. I creted a cutom login as well however I didn't run into any problems. Does the original login.html work and display correctly? Check your document root in auth/nocat.conf, should read 'DocumentRoot /usr/local/nocat/auth/htdocs' On 8/30/07, john kakavas wrote: > > Yes I did. It opens the login-no-skip.html, but it seems as it can't find > style.css and the images folder so the pages loads with no graphic. It > also cant detect the pages encoding so the text is all symbols. If i access > it directly everything is fine. In the error.log i found entries that it > was looking for images and css in the usr/local/nocat/auth/cgi-bin isnt > that starnge ? why there and not in thd htdocs folder where the html are ? > > ----- Original Message ---- > From: twistedpickles < twistedpickles at gmail.com> > To: john kakavas > Sent: Thursday, August 30, 2007 10:42:48 PM > Subject: Re: [NoCat] Nocat custom login page > > did you specify login-no-skip.html as your login page in > authserv/nocat.conf > > > -----snip----- > # Auth service template names. See the individual templates > # for details on what each one does. > # > LoginForm login.html <--- change to login-no-skip.html > LoginOKForm login_ok.html > FatalForm fatal.html > ExpiredForm expired.html > RenewForm renew.html > PassiveRenewForm renew_pasv.html > --------snip-------- > > > > On 8/30/07, john kakavas wrote: > > > > I've edited the login pages of nocat so to meet our company's needs > > using a little css but i have a problem. When it opens the page, it > > seems as though the browser can't find the css and cannot detect the > > encoding of the page (it's utf-8) .If i ask for the page directly from > > the same pc ( https://xxx.xxx.xxx.xxx/login-no-skip.html ) everythings > > looks fine. The graphics and the encoding of the page. Any suggestions ? > > > > > > > > > > > > ___________________________________________________________ > > ?????????????? Yahoo!; > > ?????????? ?? ?????????? ???????? (spam); ?? Yahoo! Mail > > ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? > > ????????? http://login.yahoo.com/config/mail?.intl=gr > > _______________________________________________ > > NoCat mailing list > > NoCat at lists.nocat.net > > http://lists.nocat.net/mailman/listinfo/nocat > > > > > > -- > ::twistedPickles:: : > > > ------------------------------ > ?????????????? Yahoo! > ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? > ???????? ?????? ????????? ???? ??? ??????????? ????????? > http://login.yahoo.com/config/mail?.intl=gr > -- ::twistedPickles:: : -- ::twistedPickles:: : From ilektrojohn at yahoo.gr Fri Aug 31 02:13:35 2007 From: ilektrojohn at yahoo.gr (john kakavas) Date: Fri, 31 Aug 2007 09:13:35 +0000 (GMT) Subject: [NoCat] Nocat custom login page Message-ID: <918510.30793.qm@web25809.mail.ukl.yahoo.com> Yes, its very strange......with the default pages everything works ok, but the default pages dont have any css,.... The errors i get in apache log are [error]script not found or unable to stat: /usr/local/nocat/auth/cgi-bin/style.css, referer https://.......... [error]script not found or unable to stat: /usr/local/nocat/auth/cgi-bin/images, referer https://.......... it seems as though apache thinks style.css and images(its a folder) are scripts and tries to find them in cgi-bin I don't have the slightest clue as what is happening.... ----- Original Message ---- From: twistedpickles To: john kakavas Cc: noct at lists.nocat.net Sent: Friday, August 31, 2007 6:37:12 AM Subject: Re: [NoCat] Nocat custom login page That is strange. I creted a cutom login as well however I didn't run into any problems. Does the original login.html work and display correctly? Check your document root in auth/nocat.conf, should read 'DocumentRoot /usr/local/nocat/auth/htdocs' On 8/30/07, john kakavas wrote: Yes I did. It opens the login-no-skip.html, but it seems as it can't find style.css and the images folder so the pages loads with no graphic. It also cant detect the pages encoding so the text is all symbols. If i access it directly everything is fine. In the error.log i found entries that it was looking for images and css in the usr/local/nocat/auth/cgi-bin isnt that starnge ? why there and not in thd htdocs folder where the html are ? ----- Original Message ---- From: twistedpickles < twistedpickles at gmail.com> To: john kakavas Sent: Thursday, August 30, 2007 10:42:48 PM Subject: Re: [NoCat] Nocat custom login page did you specify login-no-skip.html as your login page in authserv/nocat.conf -----snip----- # Auth service template names. See the individual templates # for details on what each one does. # LoginForm login.html <--- change to login-no-skip.html LoginOKForm login_ok.html FatalForm fatal.html ExpiredForm expired.html RenewForm renew.html PassiveRenewForm renew_pasv.html --------snip-------- On 8/30/07, john kakavas wrote: I've edited the login pages of nocat so to meet our company's needs using a little css but i have a problem. When it opens the page, it seems as though the browser can't find the css and cannot detect the encoding of the page (it's utf-8) .If i ask for the page directly from the same pc ( https://xxx.xxx.xxx.xxx/login-no-skip.html ) everythings looks fine. The graphics and the encoding of the page. Any suggestions ? ___________________________________________________________ ?????????????? Yahoo!; ?????????? ?? ?????????? ???????? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr _______________________________________________ NoCat mailing list NoCat at lists.nocat.net http://lists.nocat.net/mailman/listinfo/nocat -- ::twistedPickles:: : ?????????????? Yahoo! ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr -- ::twistedPickles:: : ___________________________________________________________ ?????????????? Yahoo!; ?????????? ?? ?????????? ???????? (spam); ?? Yahoo! Mail ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? ????????? http://login.yahoo.com/config/mail?.intl=gr From twistedpickles at gmail.com Fri Aug 31 09:42:38 2007 From: twistedpickles at gmail.com (twistedpickles) Date: Fri, 31 Aug 2007 11:42:38 -0500 Subject: [NoCat] Nocat custom login page In-Reply-To: <918510.30793.qm@web25809.mail.ukl.yahoo.com> References: <918510.30793.qm@web25809.mail.ukl.yahoo.com> Message-ID: Try using an absolute URL for css style sheets and images it sounds as if you might be using relative URL's. Try And place the css folder and style.css in /usr/local/nocat/auth/htdocs ex: ../auth/htdocs/css/style.css On 8/31/07, john kakavas wrote: > > Yes, its very strange......with the default pages everything works ok, but > the default pages dont have any css,.... > The errors i get in apache log are > [error]script not found or unable to stat: > /usr/local/nocat/auth/cgi-bin/style.css, referer https://.......... > [error]script not found or unable to stat: > /usr/local/nocat/auth/cgi-bin/images, referer https://.......... > > > it seems as though apache thinks style.css and images(its a folder) are > scripts and tries to find them in cgi-bin > > I don't have the slightest clue as what is happening.... > > ----- Original Message ---- > From: twistedpickles > To: john kakavas > Cc: noct at lists.nocat.net > Sent: Friday, August 31, 2007 6:37:12 AM > Subject: Re: [NoCat] Nocat custom login page > > That is strange. I creted a cutom login as well however I didn't run into > any problems. Does the original login.html work and display correctly? > > > Check your document root in auth/nocat.conf, should read 'DocumentRoot > /usr/local/nocat/auth/htdocs' > > > > > > > On 8/30/07, john kakavas wrote: > > > > Yes I did. It opens the login-no-skip.html, but it seems as it can't > > find style.css and the images folder so the pages loads with no graphic. > > It also cant detect the pages encoding so the text is all symbols. If i > > access it directly everything is fine. In the error.log i found entries > > that it was looking for images and css in the usr/local/nocat/auth/cgi-bin > > isnt that starnge ? why there and not in thd htdocs folder where the html > > are ? > > > > ----- Original Message ---- > > From: twistedpickles < twistedpickles at gmail.com> > > To: john kakavas > > Sent: Thursday, August 30, 2007 10:42:48 PM > > Subject: Re: [NoCat] Nocat custom login page > > > > did you specify login-no-skip.html as your login page in > > authserv/nocat.conf > > > > > > -----snip----- > > # Auth service template names. See the individual templates > > # for details on what each one does. > > # > > LoginForm login.html <--- change to login-no-skip.html > > LoginOKForm login_ok.html > > FatalForm fatal.html > > ExpiredForm expired.html > > RenewForm renew.html > > PassiveRenewForm renew_pasv.html > > --------snip-------- > > > > > > > > On 8/30/07, john kakavas wrote: > > > > > > I've edited the login pages of nocat so to meet our company's needs > > > using a little css but i have a problem. When it opens the page, it > > > seems as though the browser can't find the css and cannot detect the > > > encoding of the page (it's utf-8) .If i ask for the page directly from > > > the same pc ( https://xxx.xxx.xxx.xxx/login-no-skip.html ) everythings > > > looks fine. The graphics and the encoding of the page. Any suggestions > > > ? > > > > > > > > > > > > > > > ___________________________________________________________ > > > ?????????????? Yahoo!; > > > ?????????? ?? ?????????? ???????? (spam); ?? Yahoo! Mail > > > ???????? ??? ???????? ?????? ????????? ???? ??? ??????????? > > > ????????? http://login.yahoo.com/config/mail?.intl=gr > > > _______________________________________________ > > > NoCat mailing list > > > NoCat at lists.nocat.net > > > http://lists.nocat.net/mailman/listinfo/nocat > > > > > > > > > > > -- > > ::twistedPickles:: : > > > > > > ------------------------------ > > ?????????????? Yahoo! > > ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? > > ???????? ?????? ????????? ???? ??? ??????????? ????????? > > http://login.yahoo.com/config/mail?.intl=gr > > > > > > -- > ::twistedPickles:: : > > > ------------------------------ > ?????????????? Yahoo! > ?????????? ?? ?????????? ???? ???? (spam); ?? Yahoo! Mail ???????? ??? > ???????? ?????? ????????? ???? ??? ??????????? ????????? > http://login.yahoo.com/config/mail?.intl=gr > -- ::twistedPickles:: : From noteris at gmail.com Fri Aug 31 14:36:04 2007 From: noteris at gmail.com (benoit noteris) Date: Fri, 31 Aug 2007 23:36:04 +0200 Subject: [NoCat] is it possible to use nocat without DNS Message-ID: <4551fd5b0708311436m4aaed7dald2ea40b8f2443f99@mail.gmail.com> all is in the subject