From franckzak at libero.it  Wed May 16 07:09:24 2007
From: franckzak at libero.it (franckzak at libero.it)
Date: Wed, 16 May 2007 16:09:24 +0200
Subject: [NoCat] Mac address filtering
Message-ID: <JI50NO$70F5CBF4726C9A624EDEFC553FD2163A@libero.it>

Hi all,

I am a italian student (sorry for my bad english) and I'm trying to use nocat for my project of thesis.
I have installed nocat on the same machine (I have used Mysql for database authentication) and after setting all, I have no problem.

I'd like filter user based on Mac address; what's about it?

I think that is possible, changing database table and this parameters in "authserv.conf":

###### Auth service user table settings.
#
# UserTable names the table containing the user ID data.
#
# UserIDField names the column containing the ID that the
#    client uses to uniquely identifying themselves, i.e. their
#    e-mail address or username.
#
# UserPasswdField stores the user's MD5-hashed password.
#
# UserAuthField is deprecated and will go away.
#
UserTable	member
UserIDField	login
UserPasswdField pass
UserAuthField   status
UserStampField	created

GroupTable      network
GroupIDField    network
GroupAdminField admin
 
But I don't know how to use this parameter and what's the meaning of several tables!

Furthermore I see this command in the "gateway.conf":

###### Other Common Gateway Options. (stuff you probably won't have to change)
#
# ResetCmd, PermitCmd, DenyCmd -- Shell commands to reset,
#   open and close the firewall. You probably don't need to
#   change these.
#
# ResetCmd	initialize.fw
# PermitCmd	access.fw permit $MAC $IP $Class 
# DenyCmd	access.fw deny $MAC $IP $Class 

I don't know how to use this!
Can anyone help me please?  

Thanks for interesting!

franckzak at libero.it


------------------------------------------------------
Leggi GRATIS le tue mail con il telefonino i-mode? di Wind
http://i-mode.wind.it/





From franckzak at libero.it  Thu May 17 01:36:06 2007
From: franckzak at libero.it (franckzak at libero.it)
Date: Thu, 17 May 2007 10:36:06 +0200
Subject: [NoCat] Mac address filtering
Message-ID: <JI6FW6$51B9CBA3345601D90F40FD270939868F@libero.it>

---------- Initial Header -----------

>From      : "twistedpickles" twistedpickles at gmail.com
To          : "franckzak at libero.it" franckzak at libero.it
Cc          : 
Date      : Wed, 16 May 2007 18:06:55 -0500
Subject : Re: [NoCat] Mac address filtering


Hi, twistedpickles and thank you for interesting!

Sorry, but I don't understand very well. I know that NOCAT capture also MAC address, but I would like that a user with a prearranged account could access to a captive only with a NIC, therefore only one MAC address!

Can NOCAT deny access to a determinate node with a specific MAC address? Is it possible? 
I don't know if i have been clear? 

Thanks Franck

franckzak at libero.it











------------------------------------------------------
Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom
http://click.libero.it/infostrada





From twistedpickles at gmail.com  Thu May 17 09:56:47 2007
From: twistedpickles at gmail.com (twistedpickles)
Date: Thu, 17 May 2007 11:56:47 -0500
Subject: [NoCat] Mac address filtering
In-Reply-To: <JI6FW6$51B9CBA3345601D90F40FD270939868F@libero.it>
References: <JI6FW6$51B9CBA3345601D90F40FD270939868F@libero.it>
Message-ID: <a0df4bc40705170956s9649358u92194a82718f5a10@mail.gmail.com>

I am not quite sure I understand. If you want to selectively allow
access through the gateway then use login ID's and passwords.

On 5/17/07, franckzak at libero.it <franckzak at libero.it> wrote:
> ---------- Initial Header -----------
>
> From      : "twistedpickles" twistedpickles at gmail.com
> To          : "franckzak at libero.it" franckzak at libero.it
> Cc          :
> Date      : Wed, 16 May 2007 18:06:55 -0500
> Subject : Re: [NoCat] Mac address filtering
>
>
> Hi, twistedpickles and thank you for interesting!
>
> Sorry, but I don't understand very well. I know that NOCAT capture also MAC
> address, but I would like that a user with a prearranged account could
> access to a captive only with a NIC, therefore only one MAC address!
>
> Can NOCAT deny access to a determinate node with a specific MAC address? Is
> it possible?
> I don't know if i have been clear?
>
> Thanks Franck
>
> franckzak at libero.it
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------------------------
> Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom
> http://click.libero.it/infostrada
>
>
>


-- 
::twistedPickles:: :



From jlpvideo at yahoo.com  Fri May 25 10:28:27 2007
From: jlpvideo at yahoo.com (Joe Peifer)
Date: Fri, 25 May 2007 10:28:27 -0700 (PDT)
Subject: [NoCat] No splash page
Message-ID: <629309.74915.qm@web33507.mail.mud.yahoo.com>

No Splash Screen... splashd process halting...

This is my first time trying to implement NoCatSplash
on a Linksys router running OpenWRT.  Unfortunately
I'm running into a problem I don't understand... and
am hoping someone out there can provide some insight.

The device being configured is a Linksys WRT54GSv2


PREFACE... 
(Feel free to skip to PROBLEM if this is boring)

I installed OpenWRT via the Linksys administration web
interface (version openwrt-wrt54gs-squashfs.bin dated
03-Feb-2007 as downloaded from
http://downloads.openwrt.org/whiterussian/newest/default/)

After rebooting the router I pointed my browser at
192.168.1.1 and saw the friendly OpenWRT Admin Console

I set my password and then SSH'd into the device as
root

The following commands appeared to run successfully
from the SSH terminal...
	# ipkg update
	# ipkg install glib1 iptables kmod-iptables-extra
	# wget
http://nocat.net/~sderle/nocatsplash_0.93pre2-2_mipsel.ipk
	# ipkg install nocatsplash_0.93pre2-2_mipsel.ipk

Finally I cold booted the router

PROBLEM...
I expected at this point that any attempt to browse
the Internet would result in being redirected first to
a splash screen.  Instead, the system directed me
immediately to the site I was attempting to browse.

	# ps aux
	
returned

	PID  Uid     VmSize Stat Command
		1 root        356 S   init       
	    2 root            SW  [keventd]
	    3 root            RWN [ksoftirqd_CPU0]
	    4 root            SW  [kswapd]
	    5 root            SW  [bdflush]
	    6 root            SW  [kupdated]
	    8 root            SW  [mtdblockd]
	   71 root            SWN [jffs2_gcd_mtd4]
	   95 root        344 S   logger -s -p 6 -t  
	   97 root        356 S   init       
	   98 root        348 S   syslogd -C 16 
	  100 root        300 S   klogd 
	  453 root        320 S   wifi up 
	  484 root        392 S   /usr/sbin/dropbear 
	  491 root        368 S   httpd -p 80 -h /www -r
OpenWrt 
	  497 root        380 S   udhcpc -i vlan1 -b -p
/var/run/vlan1.pid -t 0 -R 
	  500 root        264 S   telnetd -l /bin/login 
	  504 root        336 S   crond -c /etc/crontabs 
	  524 nobody      424 S   dnsmasq -K -F
192.168.1.100,192.168.1.249,255.255.255
	  528 root        392 S   /usr/sbin/splashd -D 
	  600 root        596 S   /usr/sbin/dropbear 
	  603 root        440 S   -ash 
	  608 root        344 R   ps aux 

Oddly, any attempt to call the NoCatSplash
splash-screen directly
(http://192.168.1.1:5280/splash.html) causes the
splashd process to halt completely (disappears from
the list of running processes).  I must then reboot
the router to get the process started again.

Any help out there?


       
____________________________________________________________________________________Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469



From jlpvideo at yahoo.com  Fri May 25 14:41:16 2007
From: jlpvideo at yahoo.com (Joe Peifer)
Date: Fri, 25 May 2007 14:41:16 -0700 (PDT)
Subject: [NoCat] No splash page
In-Reply-To: <007b01c79f0b$99cb1b70$0400a8c0@KENWork>
Message-ID: <119420.94046.qm@web33501.mail.mud.yahoo.com>

Thanks!  I'm brand new to this open portal stuff and
didn't know about dd-wrt.  I installed it and it
worked like a charm!

--- Ken Sikora <ken at richmonder.com> wrote:

>  I use dd-wrt and it's built in and works.
> 
>   ----- Original Message ----- 
>   From: Joe Peifer 
>   To: nocat at lists.nocat.net 
>   Sent: Friday, May 25, 2007 1:28 PM
>   Subject: [NoCat] No splash page
> 
> 
>   No Splash Screen... splashd process halting...
> 
>   This is my first time trying to implement
> NoCatSplash
>   on a Linksys router running OpenWRT. 
> Unfortunately
>   I'm running into a problem I don't understand...
> and
>   am hoping someone out there can provide some
> insight.
> 
>   The device being configured is a Linksys WRT54GSv2
> 
> 
>   PREFACE... 
>   (Feel free to skip to PROBLEM if this is boring)
> 
>   I installed OpenWRT via the Linksys administration
> web
>   interface (version openwrt-wrt54gs-squashfs.bin
> dated
>   03-Feb-2007 as downloaded from
>  
>
http://downloads.openwrt.org/whiterussian/newest/default/)
> 
>   After rebooting the router I pointed my browser at
>   192.168.1.1 and saw the friendly OpenWRT Admin
> Console
> 
>   I set my password and then SSH'd into the device
> as
>   root
> 
>   The following commands appeared to run
> successfully
>   from the SSH terminal...
>   # ipkg update
>   # ipkg install glib1 iptables kmod-iptables-extra
>   # wget
>  
>
http://nocat.net/~sderle/nocatsplash_0.93pre2-2_mipsel.ipk
>   # ipkg install nocatsplash_0.93pre2-2_mipsel.ipk
> 
>   Finally I cold booted the router
> 
>   PROBLEM...
>   I expected at this point that any attempt to
> browse
>   the Internet would result in being redirected
> first to
>   a splash screen.  Instead, the system directed me
>   immediately to the site I was attempting to
> browse.
> 
>   # ps aux
> 
>   returned
> 
>   PID  Uid     VmSize Stat Command
>   1 root        356 S   init       
>       2 root            SW  [keventd]
>       3 root            RWN [ksoftirqd_CPU0]
>       4 root            SW  [kswapd]
>       5 root            SW  [bdflush]
>       6 root            SW  [kupdated]
>       8 root            SW  [mtdblockd]
>      71 root            SWN [jffs2_gcd_mtd4]
>      95 root        344 S   logger -s -p 6 -t  
>      97 root        356 S   init       
>      98 root        348 S   syslogd -C 16 
>     100 root        300 S   klogd 
>     453 root        320 S   wifi up 
>     484 root        392 S   /usr/sbin/dropbear 
>     491 root        368 S   httpd -p 80 -h /www -r
>   OpenWrt 
>     497 root        380 S   udhcpc -i vlan1 -b -p
>   /var/run/vlan1.pid -t 0 -R 
>     500 root        264 S   telnetd -l /bin/login 
>     504 root        336 S   crond -c /etc/crontabs 
>     524 nobody      424 S   dnsmasq -K -F
>   192.168.1.100,192.168.1.249,255.255.255
>     528 root        392 S   /usr/sbin/splashd -D 
>     600 root        596 S   /usr/sbin/dropbear 
>     603 root        440 S   -ash 
>     608 root        344 R   ps aux 
> 
>   Oddly, any attempt to call the NoCatSplash
>   splash-screen directly
>   (http://192.168.1.1:5280/splash.html) causes the
>   splashd process to halt completely (disappears
> from
>   the list of running processes).  I must then
> reboot
>   the router to get the process started again.
> 
>   Any help out there?
> 
> 
>          
>  
>
____________________________________________________________________________________Be
> a better Globetrotter. Get better travel answers
> from someone who knows. Yahoo! Answers - Check it
> out.
>  
>
http://answers.yahoo.com/dir/?link=list&sid=396545469
> 
> 
>   _______________________________________________
>   NoCat mailing list
>   NoCat at lists.nocat.net
>   http://lists.nocat.net/mailman/listinfo/nocat
> 
>   !DSPAM:46571c1a289521527717022!
> 
> 



       
____________________________________________________________________________________Luggage? GPS? Comic books? 
Check out fitting gifts for grads at Yahoo! Search
http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz



From tjaqua at efn.org  Fri May 25 16:59:25 2007
From: tjaqua at efn.org (tjaqua at efn.org)
Date: Fri, 25 May 2007 16:59:25 -0700 (PDT)
Subject: [NoCat] No splash page
In-Reply-To: <119420.94046.qm@web33501.mail.mud.yahoo.com>
References: <007b01c79f0b$99cb1b70$0400a8c0@KENWork>
	<119420.94046.qm@web33501.mail.mud.yahoo.com>
Message-ID: <47016.76.105.133.246.1180137565.squirrel@webmail.efn.org>

On Fri, May 25, 2007 2:41 pm, Joe Peifer wrote:
> Thanks!  I'm brand new to this open portal stuff and
> didn't know about dd-wrt.  I installed it and it worked like a charm!
>
> --- Ken Sikora <ken at richmonder.com> wrote:
>

Hmmm, dd-wrt must finally be using one of Ewrt's versions of nocat.  We
developed and fixed a lot of bugs relative to those crashes and
HTTP-parser security.  Our latest version supports 4 methods of
authentication: Open (splash-only) mode, password/pin# with quotas,
passive/external auth, and RADIUS.  Changes in the ewrt system have been
lagging due to lack of support, but if you want to stay on top of current
splashd developments, I suggest you keep in synch with us.  The version in
our portless.net CVS should almost be stable emough for a new release
(about 4 years in coming.)  I presume that OpenWRT has by now got ahold of
some of our changes as well.  If anyone has patches or feature
improvements for splashd out there, they can be sent to me directly.

Troy Jaqua
Primary Developer of the Ewrt Project.
http://www.portless.net/menu/ewrt/

>
>> I use dd-wrt and it's built in and works.
>>
>>
>> ----- Original Message -----
>> From: Joe Peifer
>> To: nocat at lists.nocat.net
>> Sent: Friday, May 25, 2007 1:28 PM
>> Subject: [NoCat] No splash page
>>
>>
>>
>> No Splash Screen... splashd process halting...
>>
>>
>> This is my first time trying to implement
>> NoCatSplash
>> on a Linksys router running OpenWRT. Unfortunately
>> I'm running into a problem I don't understand...
>> and am hoping someone out there can provide some insight.
>>
>> The device being configured is a Linksys WRT54GSv2
>>
>>
>>
>> PREFACE...
>> (Feel free to skip to PROBLEM if this is boring)
>>
>>
>> I installed OpenWRT via the Linksys administration
>> web interface (version openwrt-wrt54gs-squashfs.bin dated 03-Feb-2007 as
>> downloaded from
>>
>>
> http://downloads.openwrt.org/whiterussian/newest/default/)
>
>>
>> After rebooting the router I pointed my browser at
>> 192.168.1.1 and saw the friendly OpenWRT Admin
>> Console
>>
>>
>> I set my password and then SSH'd into the device
>> as root
>>
>> The following commands appeared to run
>> successfully from the SSH terminal... # ipkg update
>> # ipkg install glib1 iptables kmod-iptables-extra
>> # wget
>>
>>
>>
> http://nocat.net/~sderle/nocatsplash_0.93pre2-2_mipsel.ipk
>
>> # ipkg install nocatsplash_0.93pre2-2_mipsel.ipk
>>
>>
>> Finally I cold booted the router
>>
>>
>> PROBLEM...
>> I expected at this point that any attempt to
>> browse the Internet would result in being redirected first to a splash
>> screen.  Instead, the system directed me immediately to the site I was
>> attempting to browse.
>>
>> # ps aux
>>
>>
>> returned
>>
>> PID  Uid     VmSize Stat Command
>> 1 root        356 S   init
>> 2 root            SW  [keventd]
>> 3 root            RWN [ksoftirqd_CPU0]
>> 4 root            SW  [kswapd]
>> 5 root            SW  [bdflush]
>> 6 root            SW  [kupdated]
>> 8 root            SW  [mtdblockd]
>> 71 root            SWN [jffs2_gcd_mtd4]
>> 95 root        344 S   logger -s -p 6 -t
>> 97 root        356 S   init
>> 98 root        348 S   syslogd -C 16
>> 100 root        300 S   klogd
>> 453 root        320 S   wifi up
>> 484 root        392 S   /usr/sbin/dropbear
>> 491 root        368 S   httpd -p 80 -h /www -r
>> OpenWrt
>> 497 root        380 S   udhcpc -i vlan1 -b -p
>> /var/run/vlan1.pid -t 0 -R
>> 500 root        264 S   telnetd -l /bin/login
>> 504 root        336 S   crond -c /etc/crontabs
>> 524 nobody      424 S   dnsmasq -K -F
>> 192.168.1.100,192.168.1.249,255.255.255
>> 528 root        392 S   /usr/sbin/splashd -D
>> 600 root        596 S   /usr/sbin/dropbear
>> 603 root        440 S   -ash
>> 608 root        344 R   ps aux
>>
>>
>> Oddly, any attempt to call the NoCatSplash
>> splash-screen directly (http://192.168.1.1:5280/splash.html) causes the
>> splashd process to halt completely (disappears from the list of running
>> processes).  I must then reboot the router to get the process started
>> again.
>>
>> Any help out there?
>>
>>
>>
>>
>>
>>
> _________________________________________________________________________
> ___________Be
>
>> a better Globetrotter. Get better travel answers from someone who knows.
>> Yahoo! Answers - Check it
>> out.
>>
>>
> http://answers.yahoo.com/dir/?link=list&sid=396545469
>
>>
>>
>> _______________________________________________
>> NoCat mailing list
>> NoCat at lists.nocat.net
>> http://lists.nocat.net/mailman/listinfo/nocat
>>
>>
>> !DSPAM:46571c1a289521527717022!
>>
>>
>>
>
>
>
>
> _________________________________________________________________________
> ___________Luggage? GPS? Comic books?
> Check out fitting gifts for grads at Yahoo! Search
> http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz
>
>
>
> _______________________________________________
> NoCat mailing list
> NoCat at lists.nocat.net
> http://lists.nocat.net/mailman/listinfo/nocat
>
>